Batching production line - solution to the problem of vacuum suction machine not sucking materials

 Vacuum feeder, also known as vacuum conveyor, is a dust-free closed pipeline conveying equipment that uses vacuum suction to convey particles and powdered materials. It uses the pressure difference between vacuum and ambient space to form gas flow in the pipeline, drive the movement of powdered materials, and thus complete the conveying of powders. my country has introduced advanced foreign vacuum technology, continuously improved and improved it, and it is now widely used in light and heavy industries such as chemical, pharmaceutical, food, metallurgy, building materials, and agricultural and sideline products.

Vacuum conveying is a closed pipeline conveying method. This conveying method can eliminate dust environmental pollution, improve the working environment, reduce environmental and personnel pollution to materials, and improve cleanliness; because it is pipeline conveying, it occupies a small space and can complete the powder conveying in a small space, making the workroom space beautiful and generous; it is especially not limited by long and short distances. At the same time, vacuum feeder can reduce the intensity of manual labor and improve work efficiency; it is the first choice for most powder material conveying methods.

Solution to the problem of the vacuum feeder not sucking materials:

The first step is to check whether the pipeline is blocked. We only need to use tools to disassemble the equipment and then use a pipe to clear it.

There are also some common solutions for not sucking materials;

1. Check the display on the electrical control system for the reason, and then solve it, and then ensure the correct time and parameters.

2. Check whether the vacuum feeder is leaking, allowing the compressed air to leak out, which is also the reason for not sucking materials.

3. Check whether the vacuum feeder has negative pressure. If the pressure source of the compressed air does not meet the standard, it will also cause the material to not be sucked normally.

4. Open the cover on the vacuum feeder to see if it is because of the filter element. If the filter element is normal, there is no problem. If there is dust blocking, it is also one of the reasons for not sucking materials.

5. Check whether there is any leakage in the conveying pipeline, mainly to check whether the connection seal ring on the clamp is normal.